Digital to Synchro Converter board2(DS2) is a module that converts digital data of Heading signal of simulator to analog Synchro signal, and transmits the signal to the compass repeater(CR) distribution box. It has been designed to meet the IIU requirements of the intagrated combat system for Submarine.
Functions | Descriptions | Remarks |
---|---|---|
MCU | ST STM32F437VGT6 - ARM 32-bit Cortex-M4F - 180MHz, 225DMIPS - 2M single-cycle Flash - 256+4KB single-cycle SRAM - 4KB of EEPROM | - |
Synchro Output (@ Simulation mode) | INS_90Vl-l/400Hz 3P 1CH(36X) | REF : 115V/400Hz |
DSC | Digital to Synchro Converter - 14 Bit | DSC-14-H-3-R |
GPIO | 1 x Input 1 x Output : LED | S/W RESET STATUS |
RS-232 | 2 x RS-232 interface - Firmware Update | 74HCT1G08GV |
CAN | 2 x CANBUS interface - Monitoring and Control | SN65HVD233 |
USB 2.0 | 1 x USB 2.0 (EHCI) interface - For Debug | CP2102-GM |
I/O Connectors | 09031646951 x 1 UX60SC-MB-5S8 x 1 | for CANBUS, GPIO for RS-232 for AC 3P for AC 1P, DC_IN for USB |
Power Supply | 115V/400Hz, ±12V, +5V, +3.3V | - |
Power Consumption | Max. 4 Watts | 90VI-I/400Hz, 50mA Max. |
Operating Temperature | -40 ~ 85°C | - |
Weight | Max. 1.0Kg | Included frame |
Key Angle | N/A | - |
Form Factors | 3U, 2 slots (100 x 167 x 40mm) | Customized |
Frame, WedgeLok | Forward type | - |